 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Ordering number:EN6005 PNP Silicon Epitaxial Planar Transistor CPH3106 DC/DC Converter Applications Applications * Relay drivers, lamp drivers, motor drivers, strobes. Package Dimensions unit:mm 2150 [CPH3106] 2.9 0.4 0.15 Features * Adoption of MBIT processes. * High current capacitance. * Low collector-to-emitter saturation voltage. * High speed switching. * Ultrasmall-sized package permitting applied sets to be made small and slim (0.9mm). * High allowable power dissipation. 3 0.6 0.05 1 1.9 2 0.6 1.6 2.8 Specifications Absolute Maximum Ratings at Ta = 25C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP IB PC Tj Tstg Mounted on a ceramic board (600mm2x0.8mm) 0.7 0.9 1 : Base 2 : Emitter 3 : Collector SANYO : CPH3 Conditions 0.2 Ratings -15 -12 -5 -3 -5 600 0.9 150 -55 to +150 0.2 Unit V V V A A mA W C C Electrical Characteristics at Ta = 25C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Symbol ICBO IEBO hFE fT Cob VCE(sat) VBE(sat) VCB=-12V, IE=0 VEB=-4V, IC=0 VCE=-2V, IC=-500mA VCE=-2V, IC=-500mA VCB=-10V, f=1MHz IC=-1.5A, IB=-30mA IC=-1.5A, IB=-30mA 200 280 36 -110 -0.85 -165 -1.2 Conditions Ratings min typ max -0.1 -0.1 560 MHz pF mV V Unit A A Marking : AF Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 61899TS (KOTO) TA-1493 No.6005-1/4 CPH3106 Continued from preceding page. Ratings Parameter Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Turn-OFF Time Symbol V(BR)CBO IC=-10A, IE=0 V(BR)CEO IC=-1mA, RBE= V(BR)EBO ton tstg tf IC=-10A, IC=0 See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. Conditions min -15 -12 -5 30 90 10 typ max Unit V V V ns ns ns Switching Time Test Circuit PW=20s D.C.1% INPUT 1k VR + IB1 IB2 OUTPUT RL 220F 470F + 50 VBE=5V VCC=-5V -20IB1=20IB2=IC=-1.5A A11499 -2.0 -1.8 I C - VCE -14mA -12mA -200 -180 I C - VCE -0.8mA -0.7mA mA -10mA Collector Current, IC - mA Collector Current, IC - A -16 -1.6 -1.4 -1.2 -1.0 -0.8 -0.6 -160 -140 -120 -0.6mA -0.5mA -8mA -6mA -4mA -2mA -0.4mA -100 -80 -60 -40 -20 -0.3mA -0.2mA -0.4 -0.2 0 0 -0.2 -0.4 -0.6 -0.8 -0.1mA IB=0 -1.0 0 IB=0 0 -1 -2 -3 -4 -5 Collector-to-Emitter Voltage, VCE - V -3.5 Collector-to-Emitter Voltage, VCE - V 1000 7 5 3 2 I C - VBE VCE=-2V hFE - IC VCE=-2V -3.0 Collector Current, IC - A -2.5 DC Current Gain, hFE -2.0 100 7 5 3 2 10 7 5 3 2 -1.5 -1.0 -0.5 0 0 -0.2 -0.4 -0.6 -0.8 -1.0 -1.2 1.0 -0.01 2 3 5 7- 0.1 2 3 5 7 -1.0 2 3 5 7 -10 Base-to-Emitter Voltage, VBE - V Collector Current, IC - A No.6005-2/4 CPH3106 Collector-to-Emitter Saturation Voltage, VCE(sat) - V Collector-to-Emitter Saturation Voltage, VCE(sat) - V -1.0 7 5 3 2 -0.1 7 5 3 2 -0.01 7 5 3 2 -0.001 -0.01 2 3 5 7 -0.1 2 3 5 7 -1.0 2 3 5 7 -10 VCE(sat) - IC IC/IB=20 -1.0 7 5 3 2 VCE(sat) - IC IC/IB=50 -0.1 7 5 3 2 -0.01 -0.01 2 3 5 7 -0.1 2 3 5 7 -1.0 2 3 5 7 -10 Collector Current, IC - A -10 7 Collector Current, IC - A IC/IB=50 Output Capacitance, Cob - pF 1000 7 5 3 2 100 7 5 3 2 10 7 5 3 2 VBE(sat) - IC Cob - VCB f =1MHz Base-to-Emitter Saturation Voltage, VBE(sat) - V 5 3 2 -1.0 7 5 3 2 -0.1 -0.01 2 3 5 7 -0.1 2 3 5 7 -1.0 2 3 5 7 -10 1.0 -0.1 2 3 5 7 -1.0 2 3 5 7 -10 2 3 5 Collector Current, IC - A 1000 7 Collector-to-Base Voltage, VCB - V -10 7 5 3 fT - IC VCE=-2V ASO ICP IC Gain-Bandwidth Product, f T - MHz 5 10m 50 Collector Current,IC - A s 1m 0 s 3 2 2 -1.0 7 5 3 2 -0.1 7 5 3 DC op 10 0m era s s tio n 100 7 5 3 2 10 7 -0.01 2 3 5 7 -0.1 2 3 5 7 -1.0 2 3 5 7 -10 2 Ta=25C Single pulse Mounted on a ceramic board(600mm2x0.8mm) 2 3 5 7 -1.0 2 3 5 7 -10 2 Collector Current, IC - A 1.2 Collector-to-Emitter Voltage, VCE - V PC - Ta Collector Dissipation, PC - W 1.0 0.9 0.8 M ou nte d on a 0.6 0.4 cer am ic bo ard (60 0m m 2 x0 .8m 0.2 m) 0 0 20 Ambient Temperature, Ta - C 40 60 80 100 120 140 160 No.6005-3/4 CPH3106 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of June, 1999. Specifications and information herein are subject to change without notice. PS No.6005-4/4 |
Price & Availability of CPH3106
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |